PTFE Medium Size Particle Resin

Main Technical Properties

Item	Technical Index
	JF-G90	JF-G120	JF-G180
Appearance	white powder, uniform texture, no impurities
Tensile Strength, MPa ≥	25.5
Elongation at Break, w/% ≥	250
Water Content, % ≤	0.040
Bulk Density, g/L	500±100
Average Particle Size, um	60~100	101~160	161~260
Standard Specific Gravity	2.130 - 2.180
Melting Peak Temperature, ℃	327±5
Thermal Instability Index ≤	50

Product Characters

• JF-G90：The particle size is uniform. It is suitable for processing molding big plate and turning film, replacing some products of molding powder.
• JF-G120：The particle size is uniform. It is with good fluidity which is suitable for processing big plate and turning film; easy to mould large board auxiliary materials and be separated after sinter.
• JF-G180：The particle size is big. It has good fluidity, and is easy to be added into small mould.

Main Application

• JF-G90：Make tube, rod, plate and sealing material, etc.
• JF-G120：Make tube, rod, plate and sealing material, etc.
• JF-G180：Make small molding product and product which is difficult to add the material during process.

Packing, Storage & Transportation

• Net weight：（20±0.1）kg/bucket;
• Not classified as hazardous for transportation, avoid the violent vibration, the high temperature insolation and ground bumps during transportation;
• Packed in a sealed double layer polyethylene bag which is bound with special buckle, then put into a moisture-proof rigid paper bucket;
• Should be stored in a clean, cool, dry warehouse to prevent from the moisture, dust and other impurities contamination, resin agglomeration, better to take refrigerated transportation in summer.